• Wavelengths : 532 to 1625nm (other on request)
• Fiber type : GI50/125 & GI62,5/125, LCH105/125 (other on request)
• Port configuration : 1x2
• Coupling ratio : 50/50 (best ratio for this application with our technology)
• Directivity :
> 55 dB Fiber GI50/125
> 45 dB Fiber GI62,5/125
• Insertion loss : < 3,7 dB (in round trip configuration (Port 1 to Port 2) : ILoss < 6,5 dB
(can be lower than 6 dB if not used at fully filled stage))
• Uniformity : < 0,7 dB
• Temperature range :
Operating : -20°C / +70°C
Storage : -40°C / +85°C
• Packages :
08 : 45x7x8 mm Black loose tube 900µm
43 : 80x10x8 mm Black jacket 2,8mm
Product made to be used in round trip configuration.
Fibers are protected with black loose tube 900µm in order to avoid noise by external light.
One port is dedicated for injection and it is identified by a blue marking.
Note: There is no established standard for multimode components metrology. Values can vary substantially according to measurement bench set up (laser, diode, detector, etc.) Customers must check adequacy of performances on their system.